Page 402 - Window-Door-Hardware-2020

multiPoint loCking system

HLS 9000 MULTIPOINT HARDWARE SWING DOOR QUESTIONNAIRE
This form is for a HOPPE or FUHR Swing Door Multipoint System with the key cylinder below the lever handle.
Customer Name: _____________________________________________ Account Number _______________________________________

Contact: ____________________________________________________ Phone Number _________________________________________
1. Which do you see stamped on the thin edge of the metal face plate running up the entire door edge:
"FUHR" or "HOPPE®"? (This can be found in between the door latch and deadbolt area) _________________________________________
2. What is the finish of the faceplate?  Brass looking  Stainless Steel
3. Do you know who manufactured the door? How about the windows in your home? If so, please list the company:
________________________________________________________________________________________________________________
4. Is this for a single door or a pair of doors (french doors)? ___________________________________________________________________
5. What is the door thickness:  1-3/4" (45mm)  2-1/4" (57.15mm)  Other: ____________________________________________________
6. Is this a "manual" or "automatic" system? Manual: Pull up on handle to engage the multipoint locks. Automatic: Where the
multi point locks engage on their own when you close the door.  Manual  Automatic*
*NOTE: Automatic version will have a small roller-like piece located 6-1/2" above the latch. See pictures on page 401.
6A. If you have a FUHR Automatic System what finish is your auto-release strike _________________________________
7. Based on the accompanying pictures, please put an "x" by the multipoint system you have:
 Automatic Tongue* (3-Point System)  Manual Roundbolt (3-Point System)
 Manual Tongue (3-Point System)  Manual Roundbolt with Shootbolt (5-Point System)
 Automatic Roller* (3-Point System)  Manual Swing Hook (3-Point System)
 Manual Roller (3-Point System)  Manual Swing Hook (4-Point System)
 Automatic 4-Roller (5-Point System)  Manual Swing Hook with Shootbolt (5-Point System)
 Manual 4-Roller (5-Point System)  Manual Shootbolt (3-Point System for Active Door)
 Manual Tongue with Shootbolt (5-Point System)  Manual Shootbolt (2-Point System for Inactive Door)
 Manual Roller with Shootbolt (5-Point System)  Other ________________________________________________________
*NOTE: When replacing old FUHR automatic systems, the Hoppe automatic release roller will be in a different location.
Please contact your account manager for re-routing instructions.
8. FACE PLATE WIDTH: The metal plate that runs the length of the door:  5/8" (16mm)  25/32" (20mm)
9. What is the total height of the door? : __________________________________________________________________________________
10. If you have a tongue, roundbolt or roller version, what is the distance from the center of the handle to the top position of
tongue, roundbolt or roller? (Note: All measurements shown are taken when system is in the locked position)
Tongue:  23-5/8" (600mm)  29-1/4" (743mm)  37-13/64" (945mm)  41-11/32" (1050mm)  46-31/32" (1193mm)  62-3/4" (1594mm)
 Other ______________
Roundbolt:  23-5/8" (600mm)  32-1/8" (816mm)  40" (1016mm)  41-11/32" (1050mm)  47-7/8" (1216mm)  59-1/16" (1500mm)
 63" (1600mm)  Other ________________
Two Roller:  13" (330mm)  23-5/8" (600mm)  25-5/8" (651mm)  28-3/4" (730mm)  32-5/8" (829mm)  36-5/8" (930mm)
 41-11/32" (1050mm)  44-11/16" (1135mm)  50-19/32" (1285mm)  59" (1500mm)  63" (1600mm)  Other ____________________
Four Roller - Position #1:  15-3/4" (400mm)  23-5/8" (600mm)  31-1/2" (800mm)  39-3/8" (1000mm)  Other __________________
Four Roller - Position #2:  31-1/2" (800mm)  45-1/4" (1150mm)  59" (1500mm)  72-53/64" (1850mm)  Other _________________
Swing Hook - Position #1:  19-11/16" (500mm)  23-5/8" (620mm)  35-7/16" (900mm)  Other _______________________________
11. SHOOTBOLT THROW: Full extension of shootbolt:  25/32" (20mm - Standard)  1" (25mm - Available on inactive systems only)
12. HANDLE HEIGHT: The distance from the center of the door handle down to the bottom horizontal edge of the
door (36" Standard)? _______________________________________________________________________________________________
13. What is the distance from the center of the handle to the center of the thumbturn piece?
 2-7/32" (56mm)  2-53/64" (72mm)  3-5/8" (92mm - Standard)  Other:___________________________________________________
14. BACKSET: What is the distance from the center of the handle to the door edge (edge with the latch and deadbolt on it)?
 1-3/8" (35mm)  1-3/4" (45mm)  2-3/8" (60mm)  2-3/4" (70mm)
15. DEADBOLT THROW: With the door ajar, measure how far out the deadbolt extends from the edge of the door:  1/2"  1"
16. If you have a tongue, roundbolt or roller version, what is the distance from the center of the handle down to the bottom
position of tongue, roundbolt or roller? (Note: All measurements shown are taken when system is in the locked position)
Tongue:  24-13/32" (620mm)  26-27/64" (671mm)  29-21/32" (753mm)  Other: _______________
Roundbolt:  24-13/32" (620mm)  26-19/64" (668mm)  Other: _______________________________
Two Roller:  24-13/32" (620mm)  29-1/2" (750mm)  Other __________________________________
Four Roller - Position #1:  15-3/4"  Other ________________________________________________
Four Roller - Position #2:  29-1/2" (750mm)  Other ________________________________________
Swing Hook:  29-21/32" (753mm)  Other _________________________________________________

402