Page 398 - Window-Door-Hardware-2020

Profile CylinDers

PROFILE CYLINDERS
Profile Cylinder 90° to 360° Conversion Instructions*
Recommended Tools and Accessories

90° Release Tool 2 mm or 1/4" Hex Wrench
(provided) (provided)

1. Remove the set screw as shown using the hex wrench 2. Dump out the spring and pin after removing the set screw

3. Use the 90 degree release tool if the pin does not fall 4. Recycle the set screw, spring, pin and 90 degree release tool.
freely from the cylinder body in step 2 as shown.

* For the new non-logo cylinders.
Does not work on CES cylinders.
All HOPPE® Cylinders are available in Full and Thumbturn Insert Sizes. For instructions on converting cylinders from 90° to 360° go to:

Part # Finish
850-3142637 Resista® Polished Brass
850-3141933 Antique Brass
850-3141925 Resista® Polished Chrome
850-3141909 Resista® Brushed Chrome
850-3141984 Matte Black
850-3141941 Oil Rubbed Brass
Resista® Satin Nickel
90° Full Cylinder with Crescent Knob 850-3141917 Resista® Antique Nickel
850-3142629
For 1-3/4" Doors 850-3141968 Rustic Umber
850-3141976 White

Part # Finish
850-3142611 Resista® Polished Brass
850-3141853 Antique Brass
850-3141845 Resista® Polished Chrome
850-3141829 Resista® Brushed Chrome
850-3141861 Oil Rubbed Brass
850-3141837 Resista® Satin Nickel
90° Thumbturn Insert Cylinder w/Crescent Knob 850-3141870 Rustic Umber
For 1-3/4" Doors
398