Page 176 - Window-Door-Hardware-2020

WindoW Replacement HaRdWaRe

PLASTIC WINDOW OPENING CONTROL DEVICES (WOCD)
Our 50-2003 series is a dual action WOCD designed to install directly to the face of the window
jamb and interact with the active sash of any hung or sliding window. This device comes with
mounting hardware to assure proper installation and is available in right & left handing. The 50-2003
series was designed to be applied in the field or in the factory.

Part Number Handing Finish
50-2003LHBEW LH (shown) Blue White
50-2003RHBEW RH Blue White

Our 50-2005 series is a dual action WOCD designed to install directly to the window jamb
extension or return and interact with the active sash of any hung or sliding window. This device
comes with mounting hardware to assure proper installation and is available in right & left handing.
The 50-2005 series was designed to be applied in the field or in the factory.

Part Number Handing Finish
50-2005LHBEW LH (shown) Blue White
50-2005RHBEW RH Blue White
WINDOW OPENING CONTROL DEVICES (WOCD)

SafeGard™ Limiting Control Device for Casement Windows
SafeGard Provides Peace Of Mind On Casement Window Applications.
! The SafeGard is the Industry's first limiting control device offered for
Figure 1 casement windows.
! The SafeGard Limit Device was tested & certified to meet ASTM F2090-10
code requirements. The ASTM F2090 addresses window fall prevention, that
helps protect against potential falls by children through open windows.
! The SafeGard Limit Device provides a means that will limit the venting of
the window to less than 4".
! As required by code, the SafeGard Limit Device has a two (2) action
operation to fully open the window for egress purposes. This operation can
be performed without the use of keys or tools.
! Easy to follow opening and release instructions appear on the vent arm.
Note: The device will re-latch or reset automatically when window is in
closed position.
Figure 2
! The SafeGard Limit Device's track, arm and rivet are made entirely of
authentic stainless steel with Delran cover and tab.
Part Number Handing
39-933LH LH ! The SafeGard Limit Device is reliable, easy to install and easy to operate.
39-933RH RH This device meets today's more stringent safety requirements. Please consult
local building codes for WOCD and applicable requirements.
Includes: Arm Assembly, Track Assembly, Template,
Window Label, Screw Pack (4 screws) and Operating and
Installation Instructions.
Ordering Instructions:
1. Determine window handing by viewing from the outside
looking in. If the casement window hinge is on the right
side, you need a right hand limiting device.
2. Confirm the hinge cavity on your casement window
(See Fig. 2). The hinge cavity needs to be .719 (23/32")
wide x .438 (7/16") deep.
Note: The SafeGard Limiting Control Device will only work
in casement windows that have a standard 2-bar hinge cavity
with measurements as stated above.

LH Arm RH Arm This Device is Not Designed for Awning Windows.
This Device is Not Designed for Casement Windows
with a 4-Bar Hinge.

176