Page 415 - Window-Door-Hardware-2020

multi-Point loCking system

AMESBURY MULTIPOINT HARDWARE SWING DOOR QUESTIONNAIRE

Acct. #: __________________________________________________ Date: ____________________________________________________
Customer Name: ___________________________________________ Phone: ___________________________________________________
Address: _________________________________________________ Fax: _____________________________________________________
_________________________________________________________ E-mail: ___________________________________________________
1. Door Type:  Wood  PVC  Fiberglass  Aluminum
2. Door Style:  Single  Double/ French* (Fill out separate form for each door)
*If door has Astragal, what is the thickness? _________________
3. Door Thickness: ________________________________________
4. Hole spacing between handle and key cylinder:  3-5/8" (92mm) Standard  Other
5. The mortise gear box has an insert to accept a tailpiece.
6. HANDLE HEIGHT: What is the distance from the center of the handle down to the horizontal edge of the door (36" Standard)? __________
7. BACKSET: What is the distance from the center of the handle to the door edge (edge with the latch and deadbolt on it)?
 1-3/8" (35mm)  1-3/4" (45mm)  2-3/8" (60mm)
8. Faceplate Width:  5/8" (16mm)  25/32" (20mm)
9. Door Panel Height: _____________________________________
10. Based on the pictures shown below, please put an "X" by your Amesbury Multipoint System:
 Premier 3000 (Key Above Handle)  Premier 2000 (Key Below Handle)  Premier 1000 (Key Below Handle)

 Active:  Active:  Active:  Active:  Active:  Active:  Inactive:
3-point 3-point 3-point 4-point Rhino/ 5-point Tongue 5-point Rhino/ 2-point
Shootbolt Tongue Rhino Shootbolt /Shootbolt Shootbolt Shootbolt
Version Version Version Version Version Version Version

(1) Deadbolt (1" Throw) (1) Deadbolt (1" Throw) (1) Deadbolt (1" Throw) (1) Deadbolt (1" Throw) (1) Deadbolt (1" Throw) (1) Deadbolt (1" Throw) (2) Shootbolts (20mm Throw)
(2) Shootbolts (20mm Throw) (2) Tongues (2) Rhino Hooks (1) Shootbolts (20mm Throw) (2) Shootbolts (20mm Throw) (2) Shootbolts (20mm Throw)
(2) Rhino Hooks (2) Tongues (2) Rhino Hooks
11. Top Tongue Position (measured from the center of the handle to the center of the top tongue):
 18-59/64" (480.5mm)  26-25/64" (670.4mm)  32-57/64" (835.55mm)
12. Bottom Tongue Position (measured from the center of the handle to the center of the bottom tongue):
 26-27/64" (671mm)
13. Top Rhino Hook Position (measured from the center of the handle to the center of the top hook):
 14-15/32" (367.5mm)  27-15/32" (697.7mm)  40-15/32" (1028mm)
14. Bottom Rhino Hook Position (measured from the center of the handle to the center of the bottom hook):
 24-7/8" (631.7mm)

415