Page 335 - Window-Door-Hardware-2020
P. 335
Screen Hardware
CUSTOM MADE EXTRUDED ALUMINUM WICKET & HOPPER SCREENS ORDER FORM
Customer Name: ___________________________________________________Account Number ______________________________
Contact: __________________________________________________________Phone Number ________________________________
Part# Quantity Cost
990W-999 Signature ________________________________________Date ______________
For Commercial & Institutional Application
1. Select Frame Profile/Color Frame: .050 Gauge, 6063 T5 Aluminum Alloy
Mill
Bronze
90-531M 90-509M 90-497M 90-530M White
2. Select Screen Wire
Bright Aluminum Charcoal Aluminum Gray Fiberglass Charcoal Fiberglass
3. Select Type
Single Wicket Screen Hopper Screen Double Wicket Screen Full Height Hinged
□Hinged □Sliding □Hinged □Sliding Wicket Screen Other
Wicket Size_____W x_____H Wicket Size_____W x_____H
______________
(Specify)
Center slide wickets should be no Double slide wickets should be no
more than 1/3 width of screen more than 1/4 width of screen
6. Measuring Instructions:
4. Screen Size: _________________ W x _________________ H
For Hardware to be Installed
Height
Width
5. Quantity ____________ Figure 1
7. Hardware & Hardware Location:
• Hardware to be installed on ____________ rail (See Figure 2). Part No. ____________
Location: _________ " from tip/corner of screen (See Figure 1)
_________ " in from mesh side edge of screen (See Figure 1) HEAD RAIL
• Hardware to be installed on ____________ rail (See Figure 2). Part No. ____________
Location: _________ " from tip/corner of screen (See Figure 1) 90-100NS
_________ " in from mesh side edge of screen (See Figure 1)
• Hardware to be installed on ____________ rail (See Figure 2). Part No. ____________ LEFT RAIL Figure 2 RIGHT RAIL
Location: _________ " from tip/corner of screen (See Figure 1)
_________ " in from mesh side edge of screen (See Figure 1)
• Hardware to be installed on ____________ rail (See Figure 2). Part No. ____________
Location: _________ " from tip/corner of screen (See Figure 1) 90-551 SILL RAIL
_________ " in from mesh side edge of screen (See Figure 1)
IMPORTANT: Hardware must be located by position. In the spaces above please indicate both height & width AND depth of frame.
Please Call for Pricing and Delivery
335
