Page 104 - Window-Door-Hardware-2020

SaSh Support SyStemS

85-P SERIES BALANCES

Two 1/4" Pins

Example Ordering Chart
Ordering Information Balance Length Tube Color Pin Configuration Complete Part
1. Measure plastic tube length. Number
2. Identify bearing color by looking down into the tube where the 26-1/2" White - 85-P26.5W
rod comes out.
3. Select the part number from the chart below if 2 1/4" pin 19" Black 2 85-P19B-2
configuration.
4. If different configuration, select appropriate pin configuration from
the chart and add the number to the end of the part number. Tube Length Part Number Tube Length Part Number
15" 85-P15 30" 85-P30
* Note: 1/2" sizes are no longer available.
16" 85-P16 31" 85-P31
General Information 17" 85-P17 32" 85-P32
1. In the past, various bearing (or pawl) colors were used to 18" 85-P18 33" 85-P33
indicate different weight ranges for these balances. The colors
used were white, red, blue, black and yellow. Currently the 19" 85-P19 34" 85-P34
standard color for sashes weighing up to 30 lbs. is red and for 20" 85-P20 35" 85-P35
30 to 40 lbs, sash is yellow. If your sash weighs between 30 and 21" 85-P21 36" 85-P36
up to 40 lbs. Please specify HD after the part number.
2. Standard tube color is gray. If ordering white, place the letter "W" 22" 85-P22 37" 85-P37
at the end of the part number. If ordering black, place the letter 23" 85-P23 38" 85-P38
"B" at the end of the part number. 24" 85-P24 39" 85-P39
3. Appropriate tensioning tools are 85-511 and 85-515 as shown
on pages 114 and 122. 25" 85-P25 40" 85-P40
4. Accessories must be ordered separately. 26" 85-P26 41" 85-P41
27" 85-P27 42" 85-P42
28" 85-P28 43" 85-P43
Balance Pin Options 29" 85-P29 44" 85-P44
45" 85-P45
1
One 3/4" Pin

2
Two 3/4" Pins

3
One 1/2" Pin

4
Two 1/2" Pins

5
One 1/4" Pin

104